SWD9527 ihe mgbaze na-enweghị nnukwu ihe nkiri polyurea anticorrosion waterproof mkpuchi
Atụmatụ na uru
* ọdịnaya siri ike dị elu, VOC dị ala
* Usoro ngwa dị mfe, jiri scraper kpoo uwe ahụ.Ọgwụgwọ ngwa ngwa, enwere ike itinye n'elu elu kwụ ọtọ
* magburu onwe wearable, mmetụta iguzogide, iguzogide ọkọ
* mma waterproofing
* ọmarịcha iguzogide mgbasa ozi kemịkalụ, nwere ike iguzogide ụfọdụ ịta acid, alkali, mmanụ, nnu na ihe mgbaze organic
* obosara ngwa okpomọkụ, nwere ike tinye na -50 ℃ ~ 120 ℃
Oghere ngwa
Mwube, nchekwa mmiri, njem, ụlọ ọrụ kemịkalụ, ọkụ eletrik, okporo ụzọ asphalt pavement, pavement gbapee nrụzi, mgbape ụgbọ elu ọdụ ụgbọ elu, reservoir water conservancy dam, Ndozi nke mgbawa n'ụsọ oké osimiri dykes na dams, wdg.
Ozi ngwaahịa
| Ihe | Nsonaazụ |
| Ọdịdị | Agba bụ mgbanwe |
| Nnukwu ike ndọda (g/cm3)) | 1.3 |
| Viscosity (cps) @ 20℃ | 800 |
| Ọdịnaya siri ike (%) | ≥95 |
| oge ọkọchị (awa) | 1-3 |
| Ndụ ite (hrs) | Nkeji 20 |
| mkpuchi usoro iwu | 0.7kg/m2(oke 500um) |
Njirimara anụ ahụ
| Ihe | Nlele ọkọlọtọ | nsonaazụ |
| Isi ike (Oké Osimiri A) | ASTM D-2240 | 70 |
| Mgbatị (%) | ASTM D-412 | 360 |
| ike tensile (Mpa) | ASTM D-412 | 12 |
| Ike akwa mmiri (kN/m) | ASTM D-624 | 55 |
| nguzogide abrasion (750g / 500r), mg | HG/T 3831-2006 | 9 |
| Ike nrapado (Mpa) ígwè isi | HG/T 3831-2006 | 9 |
| Ike nrapado (Mpa) isi ihe | HG/T 3831-2006 | 3 |
| nguzogide mmetụta (kg.m) | GB/T23446-2009 | 1.0 |
| Njupụta (g/cm3) | GB/T 6750-2007 | 1.2 |
Njirimara kemịkalụ
| Nguzogide acid 30% H2SO4 ma ọ bụ 10% HCl, 30d | ọ dịghị nchara, ọ dịghị afụ, dịghị bee apụ |
| Nguzogide Alkali 30% NaOH, 30d | ọ dịghị nchara, ọ dịghị afụ, dịghị bee apụ |
| Nguzogide nnu 30g/L,30d | ọ dịghị nchara, ọ dịghị afụ, dịghị bee apụ |
| Nguzogide ịgba nnu, 2000h | ọ dịghị nchara, ọ dịghị afụ, dịghị bee apụ |
| Nguzogide mmanụ | enweghị afụ, enweghị bee |
| 0# Diesel, mmanụ crude, 30d | ọ dịghị nchara, ọ dịghị afụ, dịghị bee apụ |
| (Maka ntụaka: ṅaa ntị na mmetụta nke ikuku ventilashion, splash na sperage. A na-atụ aro nyocha nke imikpu onwe onye ma ọ bụrụ na achọrọ nkọwa zuru ezu.) | |
Ntuziaka ngwa
Okpomọkụ gburugburu: -5 ~ 35 ℃
iru iru ala: 35-85%
Ebe igirigi: mgbe etinyere n'elu igwe, okpomọkụ ga-adị 3 ℃ karịa ebe igirigi.
Ntuziaka ngwa
Na-atụ aro dft: 500-1000um (ma ọ bụ dabere na imewe chọrọ)
Ntughari oge: 2-4h, ọ bụrụ na gafere awa 24 ma ọ bụ nwee uzuzu n'elu, jiri akwụkwọ aja na-agbawa ma tinye ya.
Usoro ngwa akwadoro: jiri scraper na-akpụ akpụ.
Mara
Enwere ike iji ya na okpomọkụ dị n'okpuru 10 ℃.Mgbe etinyere ya na oke okpomọkụ dị ala, debe gbọmgbọm mkpuchi n'ime ụlọ ntụ oyi maka awa 24.
SWD na-adụ ọdụ ka ịgwakọta uwe gbọmgbọm mkpuchi, mechie ngwugwu ahụ nke ọma mgbe ejiri ya mee ihe iji zere mmịpụta mmiri.Ka etinyeghị ihe a wụsara n'ime gbọmgbọm mbụ ọzọ.
A na-edozi viscosity tupu ebupu ya, a gaghị etinye ihe dị nro na-enweghị usoro.Gwa onye nrụpụta na ọnọdụ pụrụ iche ka ọ gbakwunye thinner.
Oge ọgwụgwọ
| Substrate okpomọkụ | Ogologo oge ọkọchị | Okporo ụzọ ụkwụ | Ọgwụgwọ siri ike |
| + 10 ℃ | 4h | 24h | 7d |
| + 20 ℃ | 1.5h | 8h | 6d |
| + 30 ℃ | 1h | 6h | 5d |
Ndụ nchekwa
Nchekwa okpomọkụ nke gburugburu: 5-35 ℃
* Ndụ shelf: ọnwa 12 (akara akara)
* Chekwaa n'ebe dị jụụ na ikuku, zere ikpughe anwụ kpọmkwem, zere ikpo ọkụ.
* Ngwugwu: 4kg / gbọmgbọm, 20kg / gbọmgbọm.
|
- Ịgbasa nrịbama dị ala
Ọkachamara nka injinia raara onwe ya nye ka o duzie gị
Dabere na mkpa gị n'ezie, họrọ usoro nhazi na atụmatụ n'ozuzu kacha ezi uche dị na ya