Carbon peista bakeng sa filimi ea ho futhumatsa ea motlakase
1. Mokelikeli oa carbon o futhumatsang le filimi e futhumatsang ea motlakase e hōle-hōle e thehiloeng ho eona, mokhoa oa eona oa thepa e tala o kenyelletsa likarolo tse latelang ka boima ba 'mele: likarolo tse 15-20 tsa phofo ea carbon;10-20 likarolo tsa graphite;5-10 likarolo tsa khalsiamo carbide phofo;Likarolo tse 35 tsa organic carrier ~ likarolo tse 70;1 ~ 5 likarolo tsa dispersant.
2.Sesebelisoa sa manyolo se kenyelletsa resin ea epoxy, polyurethane, resin ea acrylic le ethylene oxalate;filimi e futhumatsang ea motlakase e hole haholo e thehiloeng ho eona e kenyelletsa filimi ea motheo, mochini o hlahisang mocheso oa carbon paste strip, bonyane likhoele tse peli tse tsamaisang hona joale, Filimi ea polyester holim'a likhoele tsa hona joale, likhoele tse tsamaisang hona joale li hlophisitsoe ka tsela e tšoanang. e 'ngoe le e' ngoe le ho ajoa ka linako tse itseng, 'me likhahla tsa carbon peste tse hlahisang mocheso li koahetsoe ka pente ea carbon e boletsoeng ka holimo e hlahisang mocheso.
3. Mokelikeli oa carbon o futhumatsang o entsoe ka ho kopanya phofo ea carbon, graphite, calcium carbide powder, organic carrier le dispersant ka tekanyo.Ka lehlakoreng le leng, e sebelisa sesebelisoa sa tlhaho se entsoeng ka epoxy resin, polyurethane, acrylic resin le ethylene oxalate.E le hore e be le litšoaneleho tsa lintho tse tlaase tse tiileng, li ka ntlafatsoa ka mokhoa o motle le o ts'oanang, 'me o na le ductility e ntle, e leng se loketseng ho roala seaparo se tšoanang.
| Pmofuta oa roki | Paramethara |
| Motlatsi | Rke lefatše, graphene |
| Litaba tse tiileng (WT%) | 55-65% |
| Boima ba 'mele (g/cm³) | 1.2-1.3 |
| Viscosity (dpa.s20%) | 200-500 (VT-04E viscosity detector |
| Sebaka sa ho roala (cm²/g) | (ho itšetlehile ka botenya ba filimi) 25-35 |
| Khanyetso ea sekwere (Ω/ □/25.4цm) | 20-1M (e ka etsoa ka mokhoa o ikhethileng) |
| Adhesion (tape ea 3M600, e huloang ka holimo) | ntle le ho wela fatshe |
| Ho thatafala | ≥5H |
| Matla a ho tsitsa ha matla Sekhahla sa phetoho ea matla | <± 2% (mocheso o futhumatsang ka holim'a metsi o ka bang 450 ° C, ha ho sesebelisoa sa ho laola mocheso o ka ntle, matla a tsoelang pele bakeng sa matsatsi a 30 ho leka matla)
|
1.Substrate ceramic, khalase-ceramic.
2. Khatiso ea skrine: skrine ea tšepe e sa hloekang kapa khatiso ea skrine ea polyester.
3.Diluent: metsi a hloekisitsoeng, metsi a hloekisitsoeng, metsi a hloekisitsoeng.
4. Mokhoa oa ho folisa (ho khothaletsoa) Setofo ka 200 ° C metsotso e 10 (qala ho beha nako ho 200 ° C) ebe o chesa ka 600 ° C metsotso e 20.
5.Ho hloekisa metsi.
6. Boloka mocheso oa kamore, 'me nako ea polokelo e sa buloang e feta likhoeli tse 6;(ho boloka tlas'a mocheso o phahameng le mongobo o phahameng o lokela ho qojoa).
7.Ho paka 1.00kg (kapa ha ho hlokahala).
1.Ho romelloa ka potlako!Lebelo la tlhahiso ea taelo le fanoa ka potlako nakong ea lihora tse 24-48.
2.Netefaletso ea boleng!Tsepamisa maikutlo ho tlhahiso ea enke ea carbon peista lisebelisoa tsa elektronike tse tsamaisang lilemo tse 15.
3. E ka rekoa!Lithekiso tse tobileng tsa fektheri, ha ho batho ba mahareng ba etsang phapang.
4.E netefalitsoe ka mor'a thekiso!Sehlopha sa profeshenale kamora ho rekisa, lihora tse 24 bakeng sa ts'ireletso ea hau.
5. Mohlala oa mahala!Lihlahisoa tse ling li lokolohile ho etsa sampole, haeba u sa khotsofalla litlhoko tsa hau, ha ho hlokahale hore u behe taelo ea ho reka.
|
- PTC Floor Heat panel 220V carbon Heating Films
- Ptc Floor Heating Film Ho Etsa Mohala
- Filimi ea ho futhumatsa Motlakase ka tlas'a lefatše
- Filimi e futhumatsang ea motlakase e ka tlas'a lefatše e nang le Pvc
- Filimi e futhumatsang ka tlas'a lefatše ea Carbon Paste
- Thepa ea filimi e futhumatsang ka tlas'a lefatše
- Mochini oa ho etsa lifilimi o futhumatsang fatše
- Lin
Lihlopha tsa lihlahisoa
Moenjineri ea hloahloa oa tekheniki ea inehetseng ho u tataisa
Ho ea ka litlhoko tsa hau tsa 'nete, khetha mekhoa e metle ka ho fetesisa ea moralo le moralo