SWD9515 e lenngoeng marulelong a metso ea marulelo a hanyetsanang le tšireletso e khethehileng ea polyurea e sireletsang metsi
Likarolo tsa sehlahisoa le melemo
* Ha e na Solvent, 100% litaba tse tiileng, li bolokehile, ha li na tikoloho ebile ha li na monko.
*Kalafo e potlakileng, e ka fafatsoa ka sebopeho leha e le sefe se kobehileng, letsoapong le sebakeng se otlolohileng, ha ho sagging.
* Ho roala ho teteaneng, ha ho na moroallo, ho tenyetseha hantle.
* Matla a matla a ho khomarela, ho tlamahanngoa ka potlako ho tšepe, konkreite, lehong, likhoele tsa khalase le likaroloana tse ling.
* Ho hanyetsa tšusumetso e ntle haholo, ho hanyetsa abrasion
* Ho hanyetsa kutu e ntle haholo le ho hanyetsa lik'hemik'hale ho acid, alkali, letsoai joalo-joalo.
* Ho hanyetsa ho phunya ho matla ho khahlano le motso oa semela, ho hanyetsa ho kenella le ho se kenelle ha metsi
* Ts'ebetso e ntle ea ho ts'oaroa
*Ho hanyetsa ka mokhoa o babatsehang ho fapana ha mocheso
* Pheko e potlakileng, sebaka sa kopo se khutlela ts'ebeletso kapele
* Ho tšoarella ho hoholo ho fokotsa litšenyehelo tsa tlhokomelo ea bophelo ba ts'ebeletso
* Eketsa bophelo ba ts'ebeletso ea sebopeho se fafalitsoeng
Lisebelisoa tsa Sehlahisoa
Tšireletso e sa keneleng metsi ka metso ea serapa sa marulelo, lisekoere tsa litoropo le marulelo a mang a lenngoeng
Lintlha tsa sehlahisoa
| Ntho | A | B |
| Ponahalo | Mokelikeli o mosehla o mosehla | Mmala o fetohang |
| Matla a khoheli (g/m³) | 1.13 | 1.04 |
| Viscosity (cps)@25℃ | 810 | 670 |
| Litaba tse tiileng (%) | 100 | 100 |
| Ho kopanya karo-karolelano (karolelano ea molumo) | 0 | 0 |
| Nako ea gel(ea bobeli）@25℃ | 1 | 1 |
| Nako ea ho omella (ea bobeli) | 3-5 | |
| Kakaretso ea Khopolo (dft) | 1.02kg/㎡ botenya ba filimi: 1mm | |
Lintho tsa 'mele tsa lihlahisoa
| Lintho | Tekanyetso ea teko | Sephetho |
| Ho thatafala (Lebopo A) | ASTM D-2240 | 89 |
| Sekhahla sa bolelele (%) | ASTM D-412 | 450 |
| Tensile matla (Mpa) | ASTM D-412 | 17 |
| Matla a ho lla (N/km) | ASTM D-624 | 65 |
| Ho se lekane (0.3Mpa/30min) | HG/T 3831-2006 | e sa kenelleheng |
| Ho hanyetsa ho roala (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Matla a ho khomarela (Mpa) motheo oa konkreite | HG/T 3831-2006 | 3.4 |
| Matla a ho khomarela (Mpa) motheo oa tšepe | HG/T 3831-2006 | 11 |
| Density (g/cm³) | GB/T 6750-2007 | 1.02 |
| Ho arohana ha Cathodic [1.5v, (65±5) ℃,48h] | HG/T 3831-2006 | ≤15 limilimithara |
Tlhaloso ea kopo
Hlohlelletsa junifomo ea karolo ea B pele ho kopo, kopanya ka botlalo li-pigment tse kentsoeng, kapa boleng ba sehlahisoa bo tla ameha.
fafatsa polyurea ka nako e loketseng haeba bokaholimo ba substrate bo hloekisitsoe.Bakeng sa mokhoa oa kopo le nako ea nako ea SWD polyurea speical primer ka kopo sheba bukana e 'ngoe ea lik'hamphani tsa SWD.
Kamehla sebelisa SWD spray polyurea sebakeng se senyenyane pele kopo e kholo ho hlahloba karolelano ea motsoako, 'mala le phello ea spray li nepahetse.Bakeng sa tlhaiso-leseling e batsi ea ts'ebeliso ka kopo sheba leqephe la morao-rao la litaelo tsa litaelo tsa ts'ebeliso ea letoto la SWD spray polyurea.
Nako ea pheko ea sehlahisoa
| Mocheso oa substrate | Omme | Sephethephethe sa maoto | E tiileng e ommeng |
| +10 ℃ | 20s | 45 mets | 7d |
| +20 ℃ | 15s | 15 mets | 6d |
| +30 ℃ | 12s | 5 mets | 5d |
Tlhokomeliso: nako ea ho phekola e fapana ho ea ka boemo ba tikoloho haholo-holo mocheso le mongobo o lekanyelitsoeng.
Shelf bophelo
* Ho tloha ka letsatsi la moetsi le boemong ba sephutheloana sa mantlha se tiisitsoeng:
A: Likhoeli tse 10
B: Likhoeli tse 10
*Mocheso oa polokelo: +5-35°C
Ho paka: Karolo ea A 210kg/drum, karolo ea B 200kg/drum
Etsa bonnete ba hore sephutheloana sa sehlahisoa se tiisitsoe hantle
* boloka sebakeng se pholileng le se nang le moea o pholileng, qoba ho pepesehela letsatsi ka kotloloho.
|
- Polyurea
- Ho roala ha polyurea
- Litheko tsa ho roala Polyurea
- Polyurea Bakeng sa Cartridge ea Lihlomo
- Lintho tse nang le polyurea
- Polyurethane ea polyurethane
- Theko ea Polyurea
- Spray ea polyurea
- Polyurea e hloekileng
- Hlatsoa polyurea
- Polyurea ea Transparent
Moenjineri ea hloahloa oa tekheniki ea inehetseng ho u tataisa
Ho ea ka litlhoko tsa hau tsa 'nete, khetha mekhoa e metle ka ho fetesisa ea moralo le moralo