Thermoplastic Elastomer SIS EL9101D
Application
Pressure sensitive adhesives, Sealants, Road marking paint, Bitumen modification, Waterproof membrane adhesive，Hygiene adhesive.
Specifications
| Test Items | Unit | Sales Specification range |
| Polystyrene content | wt% | 13 to 17 |
| Di-block Content | Di-block Content | 0 |
| Melt Flow rate | g/10min | 8 to 12 |
| Tensile Strength | Mpa | ≥12 |
| Elongation at Break | % | ≥1050 |
| Solution Vicosity | mPa.s | 1300 to 1700 |
| Volatile Matter | Wt% | ≤0.7 |
| Ash | Wt% | ≤0.2 |
Typical Value
| Test Items | Unit | Sales Specification range |
| Polystyrene content | wt% | 15.18 |
| Di-block Content | Di-block Content | 0 |
| Melt Flow rate | g/10min | 10.9 |
| Tensile Strength | Mpa | 26.6 |
| Elongation at Break | % | 1112 |
| Solution Vicosity | mPa.s | 1312 |
| Volatile Matter | Wt% | 0.38 |
| Ash | Wt% | 0.14 |
| Mn(SIS) | - | 99045 |
| Mn(SI) | - | - |
Regulatory/Classifications
CAS No. 25038-32-8
USA – Food and Drug Administration (FDA) When used unmodified for food contact applications the styrene-isoprene block copolymer product(s) listed in the table above will comply with the U.S. Food, Drug, and Cosmetic Act as amended under Food Additive Regulation 21 CFR 177.1810 (b)(2) with the following limitations: In addition, the styrene-isoprene block copolymer product(s) listed in the table above will also comply with the following:
US FDA: 21 CFR 175.105 Adhesives
21 CFR 177.2600 Rubber articles intended for repeated use.
21 CFR 175.125 Pressure sensitive adhesives.
21 CFR 175.300 Resinous and polymeric coatings
21 CFR 176.170 Components of paper and paperboard in contact with aqueous and fatty foods
21 CFR 176.180 Components of paper and paperboard in contact with dry food
21 CFR 175.320: Resinous and Polymeric Coating for Polyolefin Films
21 CFR 177.1210: Closures with Sealing Gaskets for Food Containers. Other regulatory information is available on request.
Brand Recommendation
Adhesive Tape
EL9102, EL9101, EL9153, EL9163, EL9620, EL9126, EL9290, EL9370