I-carbon paste yefilimu yokushisa kagesi
1. I-carbon paste yokushisa kanye nefilimu yokushisa kagesi ekude kakhulu esekelwe kuyo, ifomula yayo yempahla eluhlaza ihlanganisa izingxenye ezilandelayo ngesisindo: izingxenye ze-15-20 ze-carbon powder;10-20 izingxenye ze-graphite;5-10 izingxenye ze-calcium carbide powder;Izingxenye ezingama-35 ze-organic carrier ~ izingxenye ezingama-70;1 ~ 5 izingxenye ze-disperant.
2.I-organic carrier ihlanganisa i-epoxy resin, i-polyurethane, i-acrylic resin ne-ethylene oxalate;ifilimu yokushisa kagesi ekude-infrared esekelwe kuyo ihlanganisa ifilimu yesisekelo, i-carbon paste strip ekhiqiza ukushisa, okungenani imichilo emibili yamanje, Ifilimu ye-polyester emigqeni ephethe manje, imichilo ephethe okwamanje ihlelwe ngokufana enye nenye futhi isatshalaliswe ngezikhathi ezithile, futhi imichilo ye-carbon paste ekhiqiza ukushisa imbozwe nge-carbon paste ebalulwe ngenhla ekhiqiza ukushisa.
3. I-carbon paste yokushisisa yenziwa ngokuxuba i-carbon powder, i-graphite, i-calcium carbide powder, i-organic carrier kanye ne-disperant ngokulingana.Ngakolunye uhlangothi, isebenzisa isithwali sezinto eziphilayo esakhiwe nge-epoxy resin, i-polyurethane, i-acrylic resin ne-ethylene oxalate.Ukuze ibe nezici zokuqukethwe okuqinile okuphansi, ingathuthukiswa ngokuhambisana nokulingana nokufana, futhi ibe ne-ductility enhle, ehambisana nokugqoka okufanayo.
| Puhlobo lwedwala | Pi-aramu |
| Isigcwalisi | Rumhlaba, i-graphene |
| Okuqukethwe okuqinile (WT%) | 55-65% |
| Ukuminyana (g/cm³) | 1.2-1.3 |
| I-Viscosity (dpa.s20%) | 200-500 (VT-04E viscosity detector |
| Indawo yokugqoka (cm²/g) | (kuya ngokuqina kwefilimu) 25-35 |
| Ukumelana nesikwele (Ω/●/25.4цm) | 20-1M (kungenziwa ngezifiso) |
| Ukunamathela (i-tape ye-3M600, idonswe ngokuqondile) | ngaphandle kokuwa |
| Ukuqina | ≥5H |
| Ukuqina kwamandla avuliwe Izinga lokushintsha amandla | <±2% (izinga lokushisa elingaphezulu licishe libe ngu-450°C, alikho idivayisi yangaphandle yokulawula izinga lokushisa, ivuliwe ngokuqhubekayo izinsuku ezingu-30 ukuze kuhlolwe amandla)
|
1.I-substrate ceramic, ingilazi-ceramic.
2. Ukuphrinta isikrini: isikrini sensimbi engagqwali noma ukuphrinta kwesikrini se-polyester.
3.Diluent: amanzi deionized, amanzi ahlanzekile, amanzi distilled.
4. Inqubo yokwelapha (kuyanconywa) Ihhavini ku-200 ° C imizuzu engu-10 (qala ukubeka isikhathi ku-200 ° C) bese ushisa ku-600 ° C imizuzu engu-20.
5.Amanzi e-ejenti yokuhlanza.
6. Gcina ekamelweni lokushisa, futhi isikhathi sokugcina esingavuliwe singaphezu kwezinyanga ezingu-6;(isitoreji ngaphansi kwezinga lokushisa eliphezulu kanye nomswakama ophezulu kufanele kugwenywe).
7.Ukupakisha 1.00kg (noma njengoba kudingeka).
1.Ukuthunyelwa okusheshayo!Ijubane lokukhiqiza le-oda likhishwa ngokushesha kungakapheli amahora angama-24-48.
2.Ukuqinisekisa ikhwalithi!Gxila ekukhiqizweni kwe-inki ye-carbon paste ye-electronic conductive materials iminyaka engu-15.
3. Kuyathengeka!Ukuthengiswa okuqondile kwasefekthri, abekho abaphakathi abenza umehluko.
4.Kuqinisekisiwe ngemuva kokuthengisa!Ithimba lochwepheshe langemva kokuthengisa, amahora angama-24 ukuze uvikeleke.
5. Isampula yamahhala!Eminye imikhiqizo imahhala ukusampula, uma unganelisekile ngezidingo zakho, awudingi ukufaka i-oda lokuthenga.
|
- IPTC Floor Heat panel 220V carbon Heating Films
- I-Ptc Floor Heating Film Making Line
- Ifilimu Yokushisa Kagesi engaphansi
- Ifilimu Yokushisa Kagesi Engaphansi Nge-Pvc
- Ifilimu Yokushisa Ephansi Yekhabhoni Namathisela
- Isisetshenziswa Sefilimu Sokushisisa Ngaphansi
- Umshini Wokwenza Ifilimu Yokushisisa Ngaphansi
- I-Underfloor Heating Film Production Lin
Izigaba zemikhiqizo
Unjiniyela ochwepheshe ozinikele ukukuqondisa
Ngokuvumelana nezidingo zakho zangempela, khetha izinqubo zokuklama nezokuhlela ezinengqondo kakhulu