SWD8032 zosungunulira zaulere za polyaspartic anticorrosion zokutira
Mbali ndi ubwino
* zolimba kwambiri, kachulukidwe kakang'ono, ndikuwongolera bwino, filimu yokutira ndi yolimba, yowundana, yowala kwambiri
* mphamvu zomatira zabwino kwambiri, zogwirizana ndi polyurethane, epoxy ndi zinthu zina.
* kuuma kwakukulu, kukana kukanda bwino komanso kukana madontho
* kukana kwabwino kwambiri kwa abrasion komanso kukana kwamphamvu
* katundu wabwino kwambiri wa anticorrosion, kukana asidi, alkali, mchere ndi ena.
* palibe chikasu, palibe kusintha kwa mtundu, palibe pulverization, anti-kukalamba, ili ndi kukana kwanyengo kwabwino kwambiri komanso kusunga kuwala ndi mtundu.
* Angagwiritsidwe ntchito ngati topcoat mwachindunji pamwamba zitsulo (DTM)
* mankhwalawa ndi ogwirizana ndi chilengedwe ndipo alibe zosungunulira za benzene ndi mankhwala a lead.
* Angagwiritsidwe ntchito kutentha otsika -10 ℃, ❖ kuyanika ndi wandiweyani, kudya mankhwala.
Zambiri zamalonda
| Kanthu | Chigawo | B gawo |
| Maonekedwe | madzi achikasu owala | Mtundu wosinthika |
| Kukoka kwapadera (g/m³) | 1.05 | 1.60 |
| Kuwoneka bwino (cps)@25 ℃ | 600-1000 | 800-1500 |
| Zolimba (%) | 98 | 97 |
| Mix ratio (pa kulemera) | 1 | 2 |
| Nthawi youma pamwamba (h) | 0.5 | |
| Moyo wa mphika h (25 ℃) | 0.5 | |
| Theoretical coverage (DFT) | 0.15kg / ㎡ filimu makulidwe 100μm | |
Zodziwika bwino zakuthupi
| Kanthu | Mayeso muyezo | Zotsatira |
| Kulimba kwa pensulo | 2H | |
| Adhesive mphamvu (Mpa) zitsulo maziko | HG/T 3831-2006 | 9.3 |
| Mphamvu zomatira (Mpa) maziko a konkriti | HG/T 3831-2006 | 3.2 |
| Kusatha | 2.1Mpa | |
| Mayeso opindika (cylindrical axis) | ≤1 mm | |
| Kukana kwa abrasion (750g / 500r) mg | HG/T 3831-2006 | 12 |
| Kukana kwamphamvu kg·cm | Mtengo wa GB/T 1732 | 50 |
| Anti-kukalamba, imathandizira kukalamba 2000h | GB/T14522-1993 | Kutaya kwa kuwala ＜1, choko ＜1 |
|