Likheo tsa Carbide bakeng sa Carbide Rotary Burr Blanks

Selelekela

Re hlahisa le ho fana ka mefuta eohle ea likheo tsa carbide bakeng sa li-carbide rotary burrs, rea u amohela ho botsoa, ​​​​re tla kopana nakong ea lihora tse 24, Kenyelletso ea limaraka tsa thepa ea carbide.

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

* E khona ho etsa mefuta e fapaneng ea tšepe (ho kenyeletsoa tšepe e timang e sa sebetseng) le lisebelisoa tse seng tsa tšepe tse kang 'mabole, jade le lesapo.Ka boima ba ho fihlela HRC70,.
*Ho nka sebaka sa lebili le lenyane la ho sila ka makhetlo a mangata, ha ho na tšilafalo ea lerōle e hlahisoang.,
* Boleng bo botle ba machining le boreleli bo phahameng bo loketseng bakeng sa ho etsa moqomo o fapaneng oa hlobo ka nepo e phahameng;
* Bophelo bo bolelele ba ts'ebeletso, makhetlo a 10 ho feta lisebelisoa tsa tšepe tse lebelo le makhetlo a 200 ho feta lebili le lenyane la ho sila ka nako e telele.
* Ho bonolo ho sebetsana le ho sebetsa.E bolokehile ebile e ka tšeptjoa, e khona ho fokotsa matla a mosebetsi le ho ntlafatsa boemo ba mosebetsi;
*molemo o phahameng oa moruo, o ka ba le phokotso ea 10% ea litšenyehelo tse felletseng tsa ts'ebetso.
Hangata, lebelo la ho potoloha la lisebelisoa tsa motlakase kapa tsa moea e lokela ho ba 6000-50000 ka motsotso.
Bakeng sa ts'ebeliso e bolokehileng, li-carbide rotary burrs li tlameha ho tlamisoa ka nepo nakong ea ts'ebetso, ho qoba ho fepa ka mokhoa o ts'oanang, leloala le khutlisetsang morao le monate.Ho sireletsa mahlo a hau ka likhalase tse sireletsang le ho thibela chip ho phatloha ka nako e le 'ngoe.

Kopo

1: Ho fokotsa lithapo tsa li-flash, li-burrs le li-welding tsa likarolo tsa ho lahla, ho forging le ho tjheseletsa;
2: Qetella ho etsa mefuta e fapaneng ea liforomo tsa tšepe;
3: Qetella ho seha semathi sa mabili a vane;
4: Chamfering, ho potoloha le ho tsamaisa mefuta e fapaneng ea likarolo tsa mochini;
5: Qetella machining holim'a bokahare bo ka hare ba likarolo tsa mochini;
6: Ho betla ka botaki ba mefuta eohle ea tšepe kapa likarolo tse seng tsa tšepe;

Mefuta ea li-Cutting Edge

Mefuta e meng ea ho khaola Litšoantšo Kopo
Single Cut M Hlooho e le 'ngoe e tloaelehileng ea seha, sebōpeho sa serrated se setle, 'me qetello ea bokaholimo e ntle, e loketse ho sebetsana le tšepe e thata ka thata HRC40-60 degrees, alloy e thibelang mocheso, alloy base ea nikel, alloy e thehiloeng ho Cobalt, tšepe e sa hloekang, joalo-joalo.
Habeli Cut X Sebopeho sena sa ho itšeha habeli se na le chip e khuts'oane le pheletso e phahameng ea bokaholimo, se loketse ho sebetsa tšepe e entsoeng ka tšepe, tšepe e entsoeng ka tšepe, tšepe e thata ho feta HRC60, alloy e thehiloeng ho Nikel, alloy e thehiloeng ho cobalt, tšepe e sa hloekang ea austenitic, alloy ea titanium, joalo-joalo.
Aluminium Cut W Sebopeho sa ho itšeha sa Aluminium se na le pokotho e kholo ea chip, sehalo se bohale haholo le ho tlosa chip ka potlako, se loketse ho sebetsa aluminium, alloy alloy, tšepe e bobebe, tšepe e seng ferrous, polasetiki, rabara e thata, lehong joalo-joalo.

Lintlha Tse ka Sehloohong

Re amohela boholo bo hlophisitsoeng bakeng sa likheo tsa carbide, ka kopo ikopanye le rona.

Sebopeho le Mofuta Odara No. Boholo Mofuta oa Leino
Head Dia (mm) d1 Bolelele ba Hlooho (mm) L2 Shank Dia (mm) d2 Kakaretso ea Bolelele (mm) L1
Mofuta oa Cone Shape M M0313X03-25 3 13 3 38 X
M0413X03-38 4 13 3 51 X
M0613X03-38 6 13 3 51 X
M0618X06-45 6 18 6 63 X
M0820X06-45 8 20 6 65 X
M1020X06-45 10 20 6 65 X
M1225X06-45 12 25 6 70 X
M1425X06-45 14 25 6 70 X
M1625X06-45 16 25 6 70 X

FAQs

P: A na nka fumana lisampole tsa liteko tsa mahala?
A: E, taelo ea litsela e teng ka mor'a puisano e sebetsang.

Q: Ho thoe'ng ka nako ea pele?
A: Re na le litlhaloso tse tloaelehileng setokong, 'me li ka romelloa matsatsing a mararo ka mor'a ho netefatsa konteraka.

P: Na o ka fana ka lisebelisoa tse ling bakeng sa mochini oa jet oa metsi?
Ee, re na le barekisi ba mochini oa jet ba sebelisaneng ka lilemo tse ngata, re ka u fa lisebelisoa tse ling tsa boleng bo holimo, theko e tlase.

Q: Na fektheri ea hau e ka fana ka tlhahiso ea OEM?
A: E, haeba theko ea hau e lumellana le litlhoko, re ka u etsetsa sephutheloana ho latela litlhoko tsa hau.

Q: Na u netefatsa boleng?
A: E, re na le lits'ebeletso tse netefalitsoeng tsa ho lata lihlahisoa tse rekisitsoeng.Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le basebetsi ba rona ba thekiso.U tla fumana tšebeletso e khotsofatsang ka mor'a thekiso nakong ea lihora tse 24.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona

    Moenjineri ea hloahloa oa tekheniki ea inehetseng ho u tataisa

    Ho ea ka litlhoko tsa hau tsa 'nete, khetha mekhoa e metle ka ho fetesisa ea moralo le moralo