of Chinese Stone Machinery
. Good adhesion, high anti-rust performance;
. Strong water resistance;
. Bright color, bright and hard
. Good outdoor weather resistance.
. With good luster and psical and mechanical properties
. It can be dried at room temperature, but also low-temperature drying.
. Used for chemical atmosphere, industrial atmosphere of various steel surface coating primer. Alkyd enamel (also known as alkyd finish)
. Suitable for steel and iron equipment, steel structure, and other outdoor products surface decoration protection.
. Widely used as bridges, steel structures, towers, vehicle equipment, all kinds of steel equipment and wood products surface coating.
Item |
Standard |
Color |
All colors |
Fineness |
≤35 |
Flash point, ℃ |
38 |
Dry film thickness, um |
30-50 |
Hardness,H |
≥0.2 |
Volatile content,% |
≤50 |
Drying time (25 degrees C), H |
surface dry≤ 8h, hard dry≤ 24h |
Solid Content,% |
≥39.5 |
Salt Water resistance |
48 hrs, no blister, no fall off, no change color |
Executive Standard:HG/T2455-93
1. Air spraying and brushing are acceptable.
2. The substrate should be cleaned before use, without oil, dust, rust, etc.
3. The viscosity can be adjusted with X-6 alkyd diluent.
4. When spraying the topcoat, if the gloss is too high, it must be polished evenly with 120 mesh sandpaper or after the surface of the previous coat is dried and the construction is done before it is dried.
5. Alkyd anti-rust paint can not be directly used on zinc and aluminum substrates, and it has poor weather resistance when used alone, and should be used in conjunction with topcoat.
The surface of the primer should be clean, dry and pollution-free. Please pay attention to the coating interval between the construction and the primer.
All surfaces must be clean, dry and free of contamination. Before painting, should be assessed and treated in accordance with standard of the ISO8504:2000.
The temperature of the base floor is not less than 5℃, and at least 3℃ than the air dew point temperature, the relative humidity must less than 85% (should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.
According to your actual needs, choose the most reasonable overall design and planning procedures