Top 10

of Chinese Stone Machinery

English

ECR-glass Assembled Roving for Spray Up

Introduction

The assembled fiberglass roving for spray-up is coated with based sizing, compatible with unsaturated polyester and vinyl ester resins. Then it’s cut by the chopper, sprayed with the resin on the mold, and rolled, which is necessary to soak the resin into the fibers and eliminate air bubbles. In the end, the glass-resin mixture is cured into the product.

Brand name: Place of origin: Thailand Surface Treatment: Silicon Coated Roving type: Assembled roving Technique: Spray Up Process Fiberglass type: E-glass Resin: UP/VE Packing: Standard International Exporting Applications: Parts for vehicles, boat hulls, Sanitary products (including bath tubs, shower trays, etc), Storage tanks, Cooling towers, etc

Product Details

Product Tags

Product Specification

Product code

Filament Diameter

(μm)

Linear Density

(tex)

Compatible Resin

Product Features & Application

EWT410A

12

2400、3000

UP

VE

 Fast wet-out
Low static
Good choppability
Minor angle no spring back
Mainly used for producing boats, bathtubs, automotive parts, pipes, storage vessels and cooling towers
Especially suitable for making large flat plane products

EWT401

12

2400、3000

UP

VE

 Moderate wet out
Low fuzz
Good choppability
No spring back in small angle
Mainly be used to make the tub shower, tank, boat plaster panel

Product Features

1. Good choppability and anti-static
2. Good fiber dispersion
3. Multi-resin-compatible, like UP/VE
4. No spring back at the small angle
5. High-intensity of the composite product
6. Excellent electric (insulation) performance

Storage Suggestion

Unless otherwise specified, it is recommended to store the fiberglass spray roving in a dry, cool and moistureproof environment where the room temperature and humidity should always be maintained at 15°C to 35°C (95°F). Fiberglass roving must remain in packaging material until just before their use.

Safety Information

To ensure the safety of all users near the product and to avoid damage to the product, it is recommended that you do not stack the pallets of Continuous fiberglass Spray Roving more than three layers high.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Professional technical engineer dedicated to guide you

    According to your actual needs, choose the most reasonable overall design and planning procedures

    Hit enter to search or ESC to close